Scale Figuren Zubehör FAQ

Choose your figure or fitting by scale and intended display first, then plan your preparation and painting. Always check the individual product options before ordering.

Which scale should I choose?

Match the scale of your boat, vehicle or diorama: 1:35 means the model is one thirty-fifth of full size. A smaller denominator means a larger model. Check available space against a door, seat or window, especially for seated and kneeling figures. Matching scales alone does not guarantee a particular pose will fit.

How does scale translate to figure height?

The chart shows an approximate standing height for a 6-foot (1,829 mm) adult, rounded to the nearest millimetre. It is a calculation guide, not a measurement of every Jager Hobby figure. Characters, poses and product option labels vary; use the listing's stated dimensions when choosing. A seated or kneeling figure will be shorter overall. For fittings, divide the real object's dimensions by the scale denominator.

Approximate standing adult height by scale
Scale Height Scale Height
1:96 19 mm 1:30 61 mm
1:87 21 mm 1:25 73 mm
1:76 24 mm 1:24 76 mm
1:72 25 mm 1:20 91 mm
1:64 29 mm 1:18 102 mm
1:50 37 mm 1:16 114 mm
1:48 38 mm 1:14 131 mm
1:43 43 mm 1:13 141 mm
1:40 46 mm 1:12 152 mm
1:35 52 mm 1:10 183 mm
1:32 57 mm 1:8 229 mm

Are these 3D-printed or cast resin?

Our figure listings specify printed-to-order yellow/beige resin, fully cured before shipping and supplied unpainted. Cast resin is made in a mould; it is a different manufacturing process, not a separate guarantee of quality. This guide does not describe our figures as cast or promise a particular resin formulation.

How do finish, detail and durability compare?

Printed resin can show layer texture or support contact marks; cast resin can show mould seams, casting gates or air bubbles. These are possible preparation issues, not a statement that every model has them. Detail and surface finish depend on the individual sculpt, production and scale, so neither method is automatically sharper, smoother or stronger. Fine features can be delicate in either type: support the main body rather than lifting by weapons, fingers or accessories.

What finishing work should I expect?

Unpainted does not mean ready-finished. Inspect the model, gently wash with warm water as advised in our listings, and let it dry completely. Where needed, carefully tidy small marks, test-fit separate parts and fill visible joins before priming. Avoid sanding away fine detail. Follow the safety instructions for your tools, resin-compatible adhesives and fillers, and avoid inhaling sanding dust. Our figures are fully cured before dispatch; no additional curing step is specified in our listings.

How should I paint the model?

Use a primer suitable for resin, followed by compatible model paints. Test on an inconspicuous area and follow the paint maker's drying and safety instructions. Apply thin coats to preserve detail, then add shading and highlights as desired. Let each stage dry before handling; a compatible varnish can provide your preferred final sheen. Check each listing for what is included, and do not assume a painted example represents the supplied finish.

Which size works best for display?

Choose the matching scale for a vehicle or diorama; choose a larger scale if you prefer more room for brushwork and a standalone display. Check a rider's seating position or a crew figure's clearance before ordering. Handle finished models carefully and secure them to a suitable base where practical. Do not assume resin figures are suitable for rough play or outdoor use without product-specific confirmation.