How to Choose the Right Scale Crew Figures for Your Model Boat

Adding crew gives a model boat a sense of size and purpose. A helmsman at the wheel or a deckhand handling a line can bring a scene to life, but the figures need to fit both the boat’s scale and its character.

TG1 helmsman shown in yellow waterproofs and a blue wool cap at a ship’s wheel

TG1 helmsman shown with a painted finish for inspiration. Figures are supplied unpainted. Check individual listings for what is included.

Start with your boat’s scale

Check the kit instructions or model specifications first. A boat built at 1:32 scale will normally need 1:32 crew figures.

Scale describes how much smaller the model is than the real thing. At 1:32, every measurement is one thirty-second of full size. The larger the number after the colon, the smaller the figure.

Full-size person’s height ÷ scale number = model figure height

For example, a person 1,800 mm tall would be approximately 75 mm tall at 1:24 scale. This is a reference height, not a rule that every crew member must be identical.

Check what the stated height means

Before ordering, check whether the measurement refers to a standing person’s scale height or the actual height of the sculpt.

A seated, crouching or leaning figure will measure less from its base to the top of its head than a standing figure representing the same person. Hats, footwear and posture can also affect the overall dimensions.

For Jager Hobby figures, use the scale and height information on the individual product page. Where a height is described as a scale height based on a six-foot person, it should not be treated as the exact overall measurement of every pose.

Check the fit against your model

Even when the scales match, it pays to check the space available.

  • Measure the wheelhouse doorway and available headroom.
  • Check the distance between the wheel, seat and deck.
  • Allow room for a figure’s arms, elbows and clothing.
  • For seated figures, check the seat height and legroom.
  • Make a simple paper silhouette at the intended height to test the appearance before ordering.

Use more than one reference point. A doorway alone can be misleading if the kit’s fittings have been simplified or altered.

Match the crew to the vessel

Choose clothing and poses that support the scene you are building.

For a traditional tug or Clyde puffer, consider period workwear, overalls, wool caps and practical deck-working poses. For a modern harbour tug, look for contemporary workwear and suitable safety equipment.

TG6B crew figure shown in a flat cap, blue shirt, neck scarf and dark dungarees

TG6B illustrates traditional workwear for tug, puffer and drifter scenes. Painted finish shown for inspiration; figure supplied unpainted.

Yachts suit helmsmen and relaxed sailing crew, while fishing boats can be brought to life with figures handling lines or working on deck. For naval and historic models, check the period, uniform and role against your reference photographs.

Choose poses before choosing positions

Think about what each person is doing. A helmsman should line up naturally with the wheel, and a deckhand pulling a rope should be positioned so the line follows the direction of the hands.

TG7A deckhand in a yellow hard hat and checked shirt leaning back while pulling a rope

TG7A shows how a rope-pulling pose can suggest activity on deck. Painted finish shown for inspiration; figure supplied unpainted.

Check clearances around removable wheelhouses, access hatches and moving equipment. Test each figure in place before fixing it permanently.

Give your crew some variety

Real crews are not all the same height or build. A little variation can look natural, provided the figures remain consistent with the model’s scale.

The aim is a believable scene, not a row of identical-height figures. Choose a few complementary poses and give each crew member a reason to be there.

Before you order

Confirm your model’s scale, check the product’s measurement notes and test the available space. Then choose figures that suit the vessel’s period and the work happening aboard it.

A well-chosen crew should look as though it belongs on the boat, whether you’re building a busy harbour tug, a fishing vessel or a quiet sailing yacht.

Explore crew figures

View the TG6B traditional crew figure or explore the TG7A rope-pulling deckhand. Select the appropriate scale and check each listing before ordering.