Painting Scale Model Figures with The Army Painter Speedpaint
You do not need to paint every fold and shadow individually to give your model crew character. The Army Painter Speedpaint 2.0 is designed to produce a base colour, darker recesses and lighter raised areas in one application. This guide explains a practical approach for unpainted resin crew figures, soldiers and diorama characters.
This independent Jager Hobby guide focuses on Speedpaint 2.0. Follow the instructions supplied with your particular paints, primer and varnish. Results depend on the sculpt, undercoat, colour and application.
What you will need
- Your unpainted model figure
- A light-coloured miniature primer suitable for the material
- Speedpaint 2.0 colours for skin, clothing and equipment
- A brush with a good point, plus a small brush for details
- A hard palette, clean water and paper towel
- Speedpaint Medium if you want to adjust colour strength
- Optional conventional acrylic paints for details and highlights
- A compatible miniature varnish for protection
Our suggested starting palette is simple: one skin tone, blue, brown, a pale neutral and a dark colour. Add colours to suit your crew, such as yellow for waterproofs or a suitable uniform colour. These are colour-family suggestions, not a fixed shopping list.
1. Prepare the resin figure
Check your figure before painting. Jager Hobby resin figures are supplied fully cured; wash them in warm water as advised in the product notes and let them dry thoroughly. Handle fine details gently.
Test the figure against your model before painting, especially seated crew and helmsmen. Check the fit around wheels, seats, doorways and deck equipment. Our model boat crew scale guide explains how to choose a suitable size.

2. Start with an even, light primer
The Army Painter recommends Matt White primer for the most vibrant Speedpaint results. Other undercoat colours change the finished appearance, so test first if you prefer a warmer or more muted result.
Apply primer according to its instructions, preserving the sculpted detail rather than building up a heavy layer. Allow it to dry as directed before painting.
Why the undercoat matters: Speedpaint allows the underlying colour to influence the result. For a first attempt, an even white base is easier to judge than a patchy or very dark undercoat.
3. Shake well and use a hard palette
Shake each bottle thoroughly before dispensing. Pigment can settle, and the mixing balls help blend it back into the paint.
Use a hard palette. The Army Painter recommends this because Speedpaint can bleed through a wet palette’s sheet and stain the foam beneath it.
Try a little paint on a spare primed piece before committing to a face or a prominent jacket. Use Speedpaint Medium when you want to adjust the colour strength, testing the mix before applying it to your figure.

4. Paint one area at a time
Load your brush and apply a generous, controlled coat to one area, allowing paint to flow into folds and recesses. Aim for good coverage without leaving large puddles. Work over the whole jacket, trouser leg or other defined area while the paint is still wet.
As a practical technique, use a clean, slightly damp brush to lift excess paint from places where it collects too heavily. Watch under arms, between legs, beneath collars and around boots. Once an area starts drying, leave it alone rather than repeatedly brushing through it.
Let adjoining colours dry before painting right up to them. This makes it easier to keep skin, cuffs and clothing separate.
5. Build a believable crew colour scheme
Choose colours that suit the vessel and period. Reference photographs are useful for working clothing and uniforms. Keep the palette manageable rather than giving every garment a different bright colour.
- Traditional tug and puffer crew: try muted blues, browns, greys and off-white, with small variations between caps, shirts and overalls.
- Modern working crew: contrast work trousers with jackets, boots and safety equipment, using reference photographs for the setting.
- Yacht crew: combine casual clothing with waterproofs appropriate to your scene.
- Military figures: research the intended period and unit rather than relying on a generic uniform colour.
These are scene-building ideas, not claims that one colour scheme fits every boat or uniform.
6. Keep faces and hands simple
Start with a suitable skin-tone Speedpaint over the light primer. Apply it carefully so the paint can define the nose, mouth and fingers without flooding the detail.
For small crew figures, a neat face and clean separation between skin and clothing often matter more than painted eyeballs. Assess the figure at its normal viewing distance before adding tiny details.
If you make a mistake, let the area dry before correcting it. A pale acrylic base can restore an area before reapplying a transparent colour; test corrections on a less visible spot first.
7. Add details only where they help
Hair, boots, belts, buttons and tools help separate the different parts of the sculpt. Use a pointed brush and work slowly around boundaries.
You can leave the figure with its Speedpaint finish or add conventional acrylic details and highlights. The Army Painter recommends a varnish layer before adding further acrylic layers or highlights. Follow the drying instructions for both the paint and the varnish before continuing.
A restrained highlight on a shoulder, cap or fold can be enough. Do not feel that every surface needs another pass.
8. Let it dry and protect the finish
Do not assume touch-dry paint is ready for handling, varnishing or further layers. Follow the instructions for your paint and finishing products rather than relying on one fixed drying time.
Test a compatible varnish on a spare painted piece first. Choose the sheen to suit the scene: a matt finish can suit cloth, while selected glossier details can suggest different materials. Follow the varnish manufacturer’s application and ventilation directions.
For working RC boats: a varnished paint finish is not a guarantee of waterproofing or suitability for immersion. Check the coating manufacturer’s guidance for the exposure you expect.
Common problems and practical fixes
- Colour looks too dark: check the primer colour, paint mixing and pooling. Test a lighter undercoat or a medium-adjusted mix on a spare piece.
- Blotches or tide marks: work a defined section while wet, manage puddles and avoid disturbing areas that are starting to dry.
- Colours run together: allow adjoining areas to dry and use a smaller brush near the boundary.
- Details disappear: check for heavy primer or pooled paint. Build control on a spare figure before tackling your main crew.
- The first figure is not perfect: keep it as a reference. A small group with a consistent finish can look convincing without competition-level detail.
Start with one figure
Paint a single crew member before tackling the whole group. Make a note of the primer and colours you used so you can repeat the finish, then introduce small variations in shirts, caps and skin tones.
The aim is a believable crew that belongs on your model, not a complicated painting process. Start simple, keep the details clean and enjoy giving each figure its own character.
Manufacturer guidance
For the original instructions, see The Army Painter’s Speedpaint 2.0 how-to guide and Speedpaint Medium guidance.